Visit the LMC website for MAnuals

Clippers are great for grassy areas and are equipped with a 40hp gearbox.

• They have a formed deck made of 12 gauge plate and are recommended for tractors not exceeding 30 hp.
• Slip clutch is not available
• 3 ½, 4, 5, 6 foot Cutting width
• Comes with floating 3 Point Hitch
• All Clippers come with stump jumpers

Designed for small areas needing a heavier touch.

• Has a 40hp gearbox, sides made of 6" channel running the length of the cutter
• Deck made of 12 gauge plate. Comes with floating 3 Point Hitch
• Recommended for tractors not exceeding 30hp.
• Slip clutch not available
• 4, 5 & 6 foot cutting width
• Andy cutters come with stump jumpers

5 & 6 are available with 40hp or 60hp gearbox & sides of 6" structural channel

• Shear bolt or slip clutch.
• The deck is made of 7 gauge plate
• 1 or 2 Tail Wheels are available
• All cutters come with stump jumper
• Windspecial 7 foot is only available with a 60hp gearbox with slip clutch and has dual wheels
• Available with Flex Hitch

The LMC Heavy Duty Cutter is an excellent choice for heavy duty cutting.

All heavy duty cutters come with heavy duty Round Blade Carrier.

• Available 5, 6, 7, & 8 foot
• (New Style) 3 Point Hitch
• 5 foot has 60 to 75hp gearbox and one wheel, square deck only
• 6 & 7 foot available with 60 or 120hp gearbox
• 8 foot 120hp gearbox only
• All heavy duty models manufactured with 3/16" plate
• Slip clutch standard on all heavy duty models
• Cat II is standard on all heavy duty models
• 6, 7 & 8 Ft with square or tapered dec

 Our latest creation for heavy duty cutting

• 5, 6, & 7 foot available
• 60hp with a slip clutch
• 3/16 tapered deck
• All cutters come with stump jumper
• 2" diameter cutting capacity
• Heavy A frame
• 6" channel sides
• Safety Chains optional

 Heavy Duty

• Minimum HP 75
• 3" cutting capacity
• 2"-14" Cutting height
• 6" Blade overlap
• 250HP Divider Box
• 120HP Wing and center boxes
• Size 6 PTO DriveLines
• Laminated wheels and heavy duty hubs
• Spring loaded walking beam
• Dual wheel center
• Double chain guards (front & back)
• Standard 1 remote (2 or 3 remotes for additional charge)
• Square tube frame
• Deck rings optional
• Weight 4800 lbs
• Standard
• Minimum HP 60
• 1 ½" cutting capacity
• 2"-14" Cutting height
• 6" Blade overlap
• 250HP Divider Box
• 60HP Wing and center boxes

•  6 & 7 foot
• 3/16" x 72" Square Deck for 6 foot
• 3/16" x 84" Square Deck for 7 foot
• 60 HP Spline Gearbox
• 4" Wide Double Cutting Edge Blades 1/2" X 4" X 24 3/4"
• Low flow 20GP

LMC Finishing Mowers 4, 5, 6, & 7 foot available

• Rear Discharge
• Heavy-Duty Gearbox
• Solid Tires on 4, 5, and 6 foot
• Floating Hitch
• Adjustable Tire Height
• 3-point hitch hookup with
• Category I Lift arm pins
• Tires for 7 foot mowers are not solid
• Adjustable Tire Height
• 3-point-hitch hookup with Category 1 lift arm pins

•  3 ½, 4, 5, 6 foot
• Available with removable scarifiers and two weld-on cutting edges
• It is recommended for tractors rated below 18hp
• 3/4x2 scarifiers with 3 holes for height adjustment
• Ideal for smaller tractors

•  4, 4 ½ , 5, 5 ½ , 6-standard with 16x24x1/4 ends
• 7, 8 foot-standard with 16x24x1/2 ends
• A-Frame
• Available with removable scarifiers and two reversible cutting edges
• ¾x2½ scarifiers with 3 holes for height adjustment Ideal for smaller tractors

•  5, 6, 7, 8, 9 ½, 10 foot
• Manufactured with 4 x 6 tubing, a heavier hook-up, removable scarifiers, and two reversible cutting edges
• 3/4 x2 ½ scarifiers with 3 holes for height adjustment
• ½” x16x24 end plates

•  8, 10, 12 ft 24x36x ½ lift & tilt
• 8, 10 ft 24x24x ½ lift only
• Reversible cutting edge
• 8’ lift & tilt 75hp min.
• 10’ lift & tilt 100hp min.
• 12’ lift & tilt 120hp min.

•  Capacity of 1000 pounds
• 21/2"  weighs 37lbs
• All USA materials

•  Capacity of 2000 pounds
• Depending on Top link location, Boom Pole will lift 10 to 11 feet
• weighs 102lbs
• All USA materials

 Subsoiler, Middle Buster, Combination